The EP Greenhouse reducer is a compact and lightweight reduction reducer with a limit switch system that’s suitable for assembly of a locally available electric engine. The reducer can be used in manually-managed or climate-controlled ventilation and screen systems in greenhouses. The quick and easy-to-install EP gear motor is usually rainproof and windproof. The gear motor has a high protection course (IP65) and can be used within an ambient temperature of 0-60 °C.
The low-noise geared motor for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminum precision housing. The self-braking worm wheel transmission ensures that the drive shaft is locked when the decrease geared motor isn’t running. The fully sealed reduction gearbox has an growth chamber with a diaphragm to keep the gear oil at a low pressure under all conditions, even at high temperatures. Thanks to the usage of an expansion chamber, the reducer can be installed in any placement. There are no limitations, because there is no dependence on a bleed plug. The sealed reduction gear driver keeps the gear essential oil of the gear motor in optimal condition for its entire operating lifetime. The gearbox is ideal for discontinuous use, operating course s3-30%, with a maximum activation period of 25 minutes.
The Gear box reduction reducer has an FT85 motor assembly flange, on to which a suitable IEC standard motor can certainly be installed (EN 50347).
The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit switch system is installed in an built-in chamber and is certainly enclosed by an impact-resistant plastic material cover. The limit change system is accessible and simple to adjust. The limit change system’s maximum switching range is definitely 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The gear reducer comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The gear motor for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.
Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of application of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temps of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, maximum activation time 25 a few minutes.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC regular motor (EN 50347).
Maximum switching range of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).