Jaw Type Coupling Assortment Course of action
The selection system for identifying the proper jaw coupling size and elastomer necessitates applying the charts proven within the following pages. There are actually three elements to get chosen, two hubs and one particular elastomer. Once the shaft dimension of the driver and driven of your application are of your very same diameter, the hubs selected will be the identical. When shaft diameters vary, hubs chosen will differ accordingly.
Details needed ahead of a coupling is usually chosen:
HP (or KW) and RPM or Torque of driver
Shaft sizes of driver and driven gear and corresponding keyways
Application description
Environmental problems (i.e. excessive temperature, corrosive ailments, space limitations)
Methods In Picking out A Jaw Coupling
Step one: Establish the Nominal Torque of one’s application through the use of the following formula:
Nominal Torque = in-lb = (HP x 63025)/RPM
Nm = (KW x 9550)/RPM
Step 2: Utilizing the Application Support Components Chart one pick the support issue which best corresponds to your application.
Step 3: Determine the Layout Torque of one’s application by multiplying the Nominal Torque calculated in Stage 1 by the Application Services Component determined in Stage two.
Style and design Torque = Nominal Torque x Application Service Component
Phase 4: Employing the Spider Functionality Data Chart 2, decide on the elastomer material which most effective corresponds for your application.
Stage five: Utilizing the Jaw Nominal Rated Torque Chart 3 , locate the suitable elastomer materials column for the elastomer picked in Stage 4.
Scan down this column on the first entry exactly where the Torque Worth inside the acceptable column is greater than or equal to the Design and style Torque calculated in Stage 3.
After this worth is found, refer on the corresponding coupling size inside the very first column in the Jaw Nominal Rated Torque Chart three .
Refer to your maximum RPM value for this elastomer torque capability to guarantee that the application requirements are met. In the event the requirement is just not happy at this time, another variety of coupling can be needed for your application. Please check with Lovejoy engineering for assistance.
Stage six: Examine the application driver/driven shaft sizes towards the highest bore size available about the coupling picked. If coupling bore dimension just isn’t significant sufficient for that shaft diameter, choose the subsequent largest coupling that can accommodate the driver/driven shaft diameters.
Stage seven: Making use of the UPC variety variety table , come across the ideal Bore and Keyway sizes expected and find the quantity.