Material Handling Electrical power UNIT 2
This energy unit features energy up gravity down circuit. Activate the start off solenoid to begin the motor to lift the machine. The lowing motion is activated through the solenoid valve with the reducing pace managed through the strain compensated flow handle valve. Products of this series could be broadly utilized in the sector of logistic devices like fork lift, mini lift table, etc.
1. The duty of this power unit is S3,i.e.,thirty seconds on and 270 senconds off.
2. Clean every one of the hydraulic elements concerned in advance of mounting the power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst,which ought to also be clean and absolutely free of impurities, N46 hydraulic oil is proposed .
four. Oil modifying is required following the first 100 operation hours,afterwards when every single 3000 hours.
5. The power unit need to be mounted horizontally.
Material Managing Electrical power UNIT 1
This power unit is designed for the fork lift sector, consisting of highly effective gear pump, DC motor, manual increase and reduced valve, tank, ect. The up and down motion are controlled through the lever with the guide release valve, and that is equipped with an electric switch to activate the motor. The lowing velocity is managed through the pressure compensated flow handle valve.
1. The duty of this electrical power unit is S3, i.e. thirty seconds on and 270 senconds off.
2. Clean the many hydraulic elements concerned ahead of set up of the energy unit.
three. Viscosity of the hydraulic oil shoud be 15~46 cst, which ought to also be clean and free of charge of impurities, N46 hydraulic oil is proposed .
4. Oil altering is needed soon after the first one hundred operation hrs, afterwards as soon as every 3000 hrs.
5. The energy unit proven is created to be mounted horizontally.